Tejaswini Industries
Mallapur, Hyderabad, Telangana
SEND SMS
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Unit |
| Output Voltage | 433v |
| Cooling Type | Oil Cooled |
| Brand | Tejaswini |
| Input Voltage | 33 or 11kv |
| Phase | Three Phase |
| Energy Efficiency Level | EEL-1,2,and 3 |
Distribution transformers for industrial application is available with primary voltages of up to 33 KV and secondary voltages ranging from 433 to 11000 V. The capacity range is up to 5000 KVA. We manufacture single phase distribution transformers, three phase distribution transformers and industrial distribution transformers.
These single phase distribution transformers and three phase distribution transformers are available with 'Tap Changer' options as well as "Off Circuit Manually Operated" and "On Load Tap Changer" (OLTC) with AVR and RTCC panel.
Copper foil winding technology is used for high current sections to achieve following advantages:
Sustaining short circuit forces without any distortion in low voltage and high current winding
Hot spot in LV windings regulated
No transposition, stray losses are minimal. Thus total copper losses are also further reduced
Total copper losses reduced vis-a-vis standard losses. Thus heat dissipating area also reduce
Product Details:
| Minimum Order Quantity | 1 Unit |
| Material | Mild Steel |
| Output Voltage | 433v |
| Brand | Tejaswini |
| Input Voltage | 11000v |
| Usage/Application | Electricity Distribution |
| Voltage Rating | 11 kv |
| Rated Capacity | 10 kva to 5000 kva |
| Applicable Standards | BIS,IS,IEC |
| Cooling Type | Oil Cooled |
| Ambient Temperature | 50 DegreeC |
| Primary Voltage | 11000V |
| Lv Voltages | 433V |
| Secondary Voltage | 433V |
| Phase | Three Phase |
| Transformer Type | Distribution Transformer |
| Efficiency | 88% to 97% depending on kW rating,operating speed and voltage |
Tejaswini manufacture high voltage Transformers range upto 33,000 V. Rating upto 5000 kva
Product Details:
| Minimum Order Quantity | 1 Unit |
| Material | Copper |
| Output Voltage | 11000V or 433V |
| Input Voltage | 11000 V or 33000 V |
| Usage/Application | Industrial |
| Phase | Three Phase |
| Power | 11 or 33kv class |
| Cooling Type | Oil Cooled |
| Primary Voltage | 11000V or 33000 V |
| Secondary Voltage | 11000V or 433V |
| Minimum Order Quantity | 1 |
| Brand | Tejaswini |
| Capacity | 15 kva to 2500 kva,upto 10mva |
| Maximum Ambient Air Temperature | 50 DegreeC |
| Body material | Mild Steel |
We have highly acknowledged organisation engaged in presenting a remarkable range of Electrical Power Transformers. We manufacture Power Transformers upto 10 mva
Product Details:
| Minimum Order Quantity | 1 Number |
| Cooling Type | Dry Type/Air Cooled |
| Transformer Type | Dry type Distribution Transformer |
| Phase | Three Phase |
| Power | 11KV |
| Output Voltage | 415v/433v |
| Protection degree | IP23 |
| Rated capacity | 30-2500kVA |
We offer Dry Type Transformers. Vaccum pressure impregnated (VPI)
Product Details:
| Minimum Order Quantity | 1 Unit |
| Power | 500 KVA |
| Voltage Rating | 11000V |
| Secondary Connection Type | DELTA |
| Phase | Three Phase |
| Brand | Tejaswini |
| Cooling Type | Oil Cooled |
| Capacity | 50 |
| Energy Efficiency Level | NA |
| Frequency | 50 Hz |
| Short Circuit Impedance | 4-5 % |
Distribution transformers for industrial application is available with primary voltages of up to 33 KV and secondary voltages ranging from 433 to 11000 V. The capacity range is up to 5000 KVA. We manufacture single phase distribution transformers, three phase distribution transformers and industrial distribution transformers.
These single phase distribution transformers and three phase distribution transformers are available with ''Tap Changer'' options as well as "Off Circuit Manually Operated" and "On Load Tap Changer" (OLTC) with AVR and RTCC panel.
Copper foil winding technology is used for high current sections to achieve following advantages:
Sustaining short circuit forces without any distortion in low voltage and high current winding
Hot spot in LV windings regulated
No transposition, stray losses are minimal. Thus total copper losses are also further reduced
Total copper losses reduced vis-a-vis standard losses. Thus heat dissipating area also reduces
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Voltage Rating | 11 KV |
| Secondary Connection Type | DELTA |
| Phase | Single Phase |
| Brand | TEJASWINI |
| Cooling Type | Oil Cooled |
| Capacity | 15 KVA |
| Energy Efficiency Level | EEL2 |
| Frequency | 50 HZ |
Additional Information:
